Repainting is one of the simplest ways to give your home a facelift. It’s easy, affordable, and if done correctly, it can make your house look brand new again. A fresh coat can increase the value when selling your home. The only drawback? Repainting can be a little messy.
There are many ways to repair chipped or peeling paint, but only a few methods are actually going to work. It is most important to match it as closely as possible to the surrounding area when it comes to texture. You want the repairs to be subtle and blend in, not look like a prominent splotch on your wall. Below are the tips you can use to get your job done:
Clean the Surface
Surface cleaning is one of the essential parts of a DIY painting. If you do it carelessly, your repainting will not look good. There are two main reasons for surface cleaning before repainting. The fine dust on the surface can make your painting uneven and dirty. Another thing is that a dirty surface won’t let the paint get absorbed and get a good hold of the surface. You may use a vacuum cleaner or a soft brush to clean it gently to remove the dust. Then wipe the surface with a piece of clean cloth.
Sand
Sand before painting the walls, or you will end up with bumpy texture on the wall. It is essential to sand your walls before painting them. If you don’t, when you paint over splotchy areas, the paint won’t be very smooth, and this will result in a bumpy texture on your wall. Sanding the walls before applying a coat of paint will give a clean finish.
Making your house look fresh and new with the help of paint becomes essential when you are preparing your house for sale.
Apply a Primer
Painting your house is a fun project that you can do in just a few days. However, if you don’t prepare the surface properly, the paint won’t stick, and you may find yourself redoing your paint job later on. A primer is necessary for any painting project because it creates smooth surfaces for the paint to adhere to. You could waste your time and money repainting the entire house by skipping this step.
Apply Paint and Topcoat
We quickly get carried away while painting a room. You want to make sure you paint everything, and you want the walls to look good. However, you must understand that less is more. When you start slathering on the paint, you might notice that the walls look too light or seem to lack depth. If this happens, it may be time to add another primer layer or paint. You can also switch your brush for a foam roller if you aren’t putting enough paint on the wall.
When you’re painting your home, it’s essential to do it right the first time. Prep your walls and paint them before repainting if they are chipped or peeling.
This is a common problem for homeowners to paint their houses. Peeling paint makes the whole process of home improvement look shoddy and takes away from the overall look of your home. You can prevent this issue before repainting your house by taking the proper steps. If you’re looking to sell your house or buy a new home, do it with the best!